Remember.. Disconnect DC side first when turning
off. My RFI cure was to simply add 10000uF as close as possible to the input on the main board, I used heavy fly leads to allow it to fit in the corner of the case. I also found horrible levels of RFI pouring out the dc side of this inverter, which wiped out al
off. My RFI cure was to simply add 10000uF as close as possible to the input on the main board, I used heavy fly leads to allow it to fit in the corner of the case. I also found horrible levels of RFI pouring out the dc side of this inverter, which wiped out al
