I'm a dedicated hardware developer with a passion for creating innovative, open-source technology solutions. My focus is on modernizing retro computers, developing communication devices, and advancing keyboard technology. Join the journey to support and contribute to these innovative projects.
If your board is never used with ch55xduino before, you need to make the ch55x chip enter bootloader mode. You need to disconnect USB and unpower ch55x, connect the pull-up resistor on D+ line (generally a 10K resistor between D+ and 5V, controlled by a push-button or adjacent pads). Then you connect USB. and hit Upload. Also, a blank new chip will enter the bootloader automatically.
1K resistor to 3.3v on pin usb-p
