A Flasher utility for DIY miners to flash NerdMiner firmware onto various boards, such as LILYGO S3 Dongle, LILYGO T-Display-AMOLED, ESP32-WROOM, LILYGO T-QT, TDisplay v1.14, ESP32-2432S028R, and M5-StampS3. The flashing process should take less than one minute.
This desktop gadget, based on ESP32 C3, is a mini-TV and unique design artwork. It features a 1.44-inch LCD screen, WiFi connectivity for displaying weather and time, and a portable pendant design.
The SQFMI Watchy is a fully open-source, hackable ePaper watch based on the ESP32 with a crisp, glare-free 1.54" 200x200 ePaper display which can be programmed using the Arduino IDE and lots of your favourite Arduino/ESP libraries!
This repository contains a star/planets engine in an Arduino library.
Open-source project showcasing a speech-to-text application on a low-cost CH32V003 microcontroller. The application reads audio from an analog microphone, identifies spoken digits 'zero' to 'nine', and logs the results over a serial link.
Watchy is an open source E-Ink Smartwatch with an MIT license. Development resources and documentation can be found on the official website watchy.sqfmi.com. There are also several retailers selling the watch hardware. See the documentation for instructions on how to get started with developing for Watchy.
The Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and Thread).
This project guides you through building a real working Star Trek Communicator using FONA Feather and 3D printing.
• The prop can make real cell phone calls using the FONA Feather!
• The device features a vibration motor, speaker, and microphone mounted inside the case.
• You can customize the buttons to call any number you want.
• The 2500mAh battery is rechargeable over USB and will provide several hours of energy.
• The prop can make real cell phone calls using the FONA Feather!
• The device features a vibration motor, speaker, and microphone mounted inside the case.
• You can customize the buttons to call any number you want.
• The 2500mAh battery is rechargeable over USB and will provide several hours of energy.
U8X8_GP1287AI_256X50_4W_SW_SPI u8x8(/* clock=*/ 0, /* data=*/ 2, /* cs=*/ 14, /* dc=*/ 4, /* reset=*/16);
Kresmo is an Arduino sketch that uses an OpenAI-compatible API to generate a random and brief pithy saying. The sketch uses the U8g2 library for displaying text on an OLED screen, and the WiFi library for connecting to the internet. The ESP32-C3-0.42 module combines all this hardware into one tiny board.
