Jean-Luc Aufranc writes that Seeed Studio’s reTerminal Sticky is a 3.97-inch magnetic touch ePaper display powered by an ESP32-S3 microcontroller. This device can serve as an e-reader, live dashboard, or home automation controller via support for open-source firmware like Crosspoint, TRMNL, and ESPHome. It features a capacitive touchscreen and edge computing capabilities through its built-in microphone.
- 800 x 480 resolution with four levels of grayscale
- Includes temperature/humidity sensors and a 3-axis accelerometer
- Equipped with a 750 mAh battery providing approximately seven days of standby time
- Retails for $49.90
- 800 x 480 resolution with four levels of grayscale
- Includes temperature/humidity sensors and a 3-axis accelerometer
- Equipped with a 750 mAh battery providing approximately seven days of standby time
- Retails for $49.90
Discussion thread about using a Seeed Studio reTerminal E1002 color ePaper display as a Home Assistant dashboard.
This article provides a guide on how to use the ESP32C3's onboard EEPROM. It includes general ways to use the EEPROM, and specific examples using Arduino IDE and MicroPython.
This article provides a guide on how to get started with Seeed Studio's XIAO ESP32C3 board, a mini development board based on the Espressif ESP32-C3 WiFi/Bluetooth dual-mode chip. The guide covers hardware setup, software setup, and a simple LED blinking example using Arduino IDE.
This article showcases a bench project featuring a Seeed Studio XIAO-ESP32-C3 microcontroller board and a 1.28-inch circular TFT display. The XIAO-ESP32-C3, known for its small size and energy efficiency, is packed with the TFT display on a prototyping board. The uncommitted pins are wired to pin sockets, creating a small bench setup.
The Seeed Studio XIAO ESP32C6 is a cost-effective MCU based on Espressif’s ESP32-C6. This compact MCU excels in Matter-compliant smart home applications with its support for various wireless connectivity (2.4GHz Wi-Fi 6, BLE 5.0, Zigbee, and Thread).
Learn how to get started with Seeed Studio XIAO ESP32C6 development board. This page covers hardware and software preparation, running the first Blink program, battery usage, and deep sleep mode.
