Jean-Luc Aufranc writes that Seeed Studio’s reTerminal Sticky is a 3.97-inch magnetic touch ePaper display powered by an ESP32-S3 microcontroller. This device can serve as an e-reader, live dashboard, or home automation controller via support for open-source firmware like Crosspoint, TRMNL, and ESPHome. It features a capacitive touchscreen and edge computing capabilities through its built-in microphone.
- 800 x 480 resolution with four levels of grayscale
- Includes temperature/humidity sensors and a 3-axis accelerometer
- Equipped with a 750 mAh battery providing approximately seven days of standby time
- Retails for $49.90
- 800 x 480 resolution with four levels of grayscale
- Includes temperature/humidity sensors and a 3-axis accelerometer
- Equipped with a 750 mAh battery providing approximately seven days of standby time
- Retails for $49.90
Discussion about configuring SpotPear with DeepSeek for voice assistance in Home Assistant using ESPHome.
The Heltec WiFi LoRa 32 (V4) is an ESP32-S3-based off-grid LoRa/Meshtastic communicator with solar charging, optional GNSS, and a high 28dBm transmit power.
An overview of the M5Stack Cardputer, a compact, card-sized portable computer with an ESP32-S3 chip, keyboard, screen, and various peripherals. It's aimed at engineers, developers, and IoT enthusiasts, with support for Python, Arduino, and even a Forth interpreter.
A curated list of resources for the M5Stack Cardputer, a $30 credit-card sized mini computer based on the ESP32-S3. Includes specs, pre-installed apps, community apps, and resources.
The Cardputer v1.1 is a high-performance card computer for engineers featuring the StampS3A microcontroller, 56-key keyboard, 1.14-inch TFT screen, and various connectivity options for prototyping, industrial control, and IoT projects.
The Meshtastic 2.6 Preview introduces major new features including the Meshtastic UI (MUI) for standalone devices, next-hop routing for direct messages, and InkHUD for e-ink devices. These updates aim to enhance user experience, improve routing efficiency, and maintain device data integrity. The release is in preview stage to gather feedback and ensure robust performance.
The T-Deck is a compact device with a 2.8-inch IPS LCD touch screen, integrated keyboard, trackball, microphone, and speaker, running on an ESP32-S3 dual-core processor. It supports various frequencies and includes a GPS module and battery in its Plus variant. It features a U.FL/IPEX antenna connector for LoRa and can be flashed using Espressif's firmware download mode.
The ESP32-S3 IR Thermal Imaging Camera Module is a wireless IR thermal imaging camera based on the ESP32-S3-WROOM-1 chip, featuring 80x62 array pixels and supporting 45°/90° FOV. It integrates a recharge and discharge circuit with onboard Lithium battery header for flexible power supply.
