Tyler August writes that the Cheap Yellow Display (CYD) ESP32 dev boards can be transformed into a Portable Digital Assistant, reminiscent of 1990s Palm devices. Rather than using an emulator, user sau412 developed custom firmware for the CYD that includes features like a Gopher browser, RSS and Wikipedia readers, various games, a BASIC interpreter, a calendar, calculator, contact list, ebook reader, and translator.
- The project can be set up in approximately five minutes using a web-based flasher.
- An SD card is required to test all the available applications.
- This project provides an alternative for those looking for Palm OS-style functionality on modern hardware without needing x86 or ARM emulators like Pumpkin OS.
- The project can be set up in approximately five minutes using a web-based flasher.
- An SD card is required to test all the available applications.
- This project provides an alternative for those looking for Palm OS-style functionality on modern hardware without needing x86 or ARM emulators like Pumpkin OS.
Ashwini Sinha explains how ESP-Claw turns an ESP32 into a self-programming agent through natural language instructions. By integrating LLMs, the system can automatically generate code and flash firmware to perform tasks such as managing sensor data or controlling peripherals without manual coding. This setup effectively transforms conventional microcontrollers into intelligent embedded systems capable of autonomous updates and performance optimization.
- Minimum hardware requirements include 8 MB PSRAM and 8 MB Flash memory on the ESP chip.
- The agent can access information via web search capabilities to answer specific queries.
- Setup requires a USB-C cable for initial firmware flashing and programming.
- Minimum hardware requirements include 8 MB PSRAM and 8 MB Flash memory on the ESP chip.
- The agent can access information via web search capabilities to answer specific queries.
- Setup requires a USB-C cable for initial firmware flashing and programming.
Debashis Das writes that the ZecTrix Note 4 is an ESP32-S3 based smart note featuring a 4.2-inch e-paper display and integrated voice capabilities for managing reminders, weather, and schedules. The device offers both monochrome and four-color variants (Note 4C) and includes built-in hardware such as a microphone, speaker, NFC, and a rechargeable battery.
- Uses Espressif ESP32-S3 SoC with vector extensions for machine learning workloads.
- Features community firmware options like Slate or TransitInk OS to repurpose the device.
- The Note 4C four-color variant is notably cheaper than the monochrome version on the manufacturer's website.
- Uses Espressif ESP32-S3 SoC with vector extensions for machine learning workloads.
- Features community firmware options like Slate or TransitInk OS to repurpose the device.
- The Note 4C four-color variant is notably cheaper than the monochrome version on the manufacturer's website.
Jean-Luc Aufranc writes that Seeed Studio’s reTerminal Sticky is a 3.97-inch magnetic touch ePaper display powered by an ESP32-S3 microcontroller. This device can serve as an e-reader, live dashboard, or home automation controller via support for open-source firmware like Crosspoint, TRMNL, and ESPHome. It features a capacitive touchscreen and edge computing capabilities through its built-in microphone.
- 800 x 480 resolution with four levels of grayscale
- Includes temperature/humidity sensors and a 3-axis accelerometer
- Equipped with a 750 mAh battery providing approximately seven days of standby time
- Retails for $49.90
- 800 x 480 resolution with four levels of grayscale
- Includes temperature/humidity sensors and a 3-axis accelerometer
- Equipped with a 750 mAh battery providing approximately seven days of standby time
- Retails for $49.90
Building an affordable Home Assistant dashboard does not require expensive hardware. This guide explores several low-cost methods to create functional control panels and information displays using existing or cheap equipment.
Ways to build a budget dashboard include:
* Repurposing old tablets, phones, or even Kindles from your junk drawer using kiosk browsers or the Home Assistant companion app.
* Purchasing second-hand hardware like older tablets or digital photo frames through online marketplaces.
* Using small ESP32 touchscreen modules for low-power desktop dashboards.
* Implementing E-Ink displays for minimal, always-on information such as weather and calendars.
* Jailbreaking used smart displays to bypass manufacturer limitations and run custom software.
Ways to build a budget dashboard include:
* Repurposing old tablets, phones, or even Kindles from your junk drawer using kiosk browsers or the Home Assistant companion app.
* Purchasing second-hand hardware like older tablets or digital photo frames through online marketplaces.
* Using small ESP32 touchscreen modules for low-power desktop dashboards.
* Implementing E-Ink displays for minimal, always-on information such as weather and calendars.
* Jailbreaking used smart displays to bypass manufacturer limitations and run custom software.
ESP-Claw is an AI agent framework by Espressif that enables ESP32 series chips to function as active decision-making centers rather than passive executors. It implements a full intelligence loop involving sensing, reasoning, and execution locally on edge hardware. Through conversational programming via chat interfaces, users can define device behaviors using dynamic Lua loading without traditional coding expertise.
- Event-driven architecture with millisecond response times
- Structured memory management that prioritizes privacy by keeping data off the cloud
- MCP communication support allowing devices to act as both a client and a server
- Broad compatibility with various LLM APIs including OpenAI, Anthropic, Qwen, and DeepSeek
- Support for multiple development boards via web-based flashing or local builds
- Event-driven architecture with millisecond response times
- Structured memory management that prioritizes privacy by keeping data off the cloud
- MCP communication support allowing devices to act as both a client and a server
- Broad compatibility with various LLM APIs including OpenAI, Anthropic, Qwen, and DeepSeek
- Support for multiple development boards via web-based flashing or local builds
A wireless 24GHz mmWave motion tracking system consisting of a standalone radar node that reports detected targets over Wi-Fi to a separate display unit.
Key details:
- Multi-target tracking for up to 3 people within a 7m range
- Live radar-style visualization on an Arduino GIGA Display Shield
- Distance-reactive audio alerts via a passive piezo buzzer
- Battery-powered operation with USB-C recharging and LED level indicators
- Includes 3D-printable enclosure files and full firmware for the XIAO ESP32-S3 and GIGA R1
Key details:
- Multi-target tracking for up to 3 people within a 7m range
- Live radar-style visualization on an Arduino GIGA Display Shield
- Distance-reactive audio alerts via a passive piezo buzzer
- Battery-powered operation with USB-C recharging and LED level indicators
- Includes 3D-printable enclosure files and full firmware for the XIAO ESP32-S3 and GIGA R1
This project is an ESP32-based ADSB tracker that provides a real-time flight radar display similar to FlightRadar24 on a small round TFT screen. It displays aircraft positions, trails, and local airport markers using data from sources like ADSB.lol or OpenSky. The system includes advanced visual features such as auto zoom cycling, decorative day/night sky layers with sun and moon calculations based on solar math, and optional GPS support for localized tracking.
- ESP32 DevKit V1 compatibility with Waveshare 1.28 inch GC9A01 round TFT display
- WiFiManager integration for easy network configuration
- Real-time aircraft trails and deconfliction to reduce visual clutter near airports
- Dynamic zoom cycling from 25 km to 250 km range
- Local solar math for sun position and moon phase rendering
- Optional TinyGPSPlus support for live location coordinates
- ESP32 DevKit V1 compatibility with Waveshare 1.28 inch GC9A01 round TFT display
- WiFiManager integration for easy network configuration
- Real-time aircraft trails and deconfliction to reduce visual clutter near airports
- Dynamic zoom cycling from 25 km to 250 km range
- Local solar math for sun position and moon phase rendering
- Optional TinyGPSPlus support for live location coordinates
An overview of ESPConnect, a free self-hosted web utility used to manage and flash ESP32 microcontrollers. The tool provides detailed hardware profiling for various MCU models, allows for advanced partition management, and enables flashing firmware or creating system backups through filesystem access. It also includes essential debugging features like an NVS Inspector and a Serial Monitor.
- Detailed hardware profile generation (MAC address, memory, clock speeds)
- Partition layout modification and flash backup capabilities
- File system support including SPIFFS, LittleFS, and FATFS
- Debugging via UART logs and session history tracking
- Easy deployment on Proxmox using LXC scripts
- Detailed hardware profile generation (MAC address, memory, clock speeds)
- Partition layout modification and flash backup capabilities
- File system support including SPIFFS, LittleFS, and FATFS
- Debugging via UART logs and session history tracking
- Easy deployment on Proxmox using LXC scripts
Clawdmeter is a custom-built desk dashboard powered by the ESP32-S3 that provides real-time monitoring of Claude Code token usage. Utilizing a 2.16-inch AMOLED screen and Bluetooth LE connectivity, the device displays animated pixel art that reacts to usage rates and acts as a HID keyboard for quick command shortcuts via BLE.
